Article successfully added.
12V Battery-, charging- and starting system analyzer
12V Battery-, charging- and starting system analyzer
- Article No.: 550.1645
- EAN: 4042146579695
- Promotional price: €211.90 *
Description
- suitable for 12 volt batteries (lead acid, gel, wet cell, MF, VRLA, calcium, AGM and deep cycle batteries)
- automatic control of the entire test procedure through menu navigation
- for the quick and simple determination of battery efficiency while taking the temperature compensation into account
- checks the battery condition, charge status, internal resistance, cold start current value
- with verification function for the starter battery, starter and load circuit measurement
- the measurement results are shown via an accurate 5-digit LCD display
- in addition, the measurement results are displayed via coloured symbols: OK, charge and poor
- the connection to the battery takes place via two plastic-coated crocodile pole clamps
- avoidance of an overload of the battery through too long of a measurement time
- illuminated and very easy to read LCD display
- 0.45 metre long cable allows for flexible work
- resistant rubber cup casing
Properties
| Readout: | LCD display |
| Voltage range: | 7,6-17 V |
| Packaging length, mm: | 283 |
| Frequency: | 100 |
| Packaging height, mm: | 65 |
| Display accuracy1: | +/- 0,5 Megaohm |
| Weight [g]: | 1000 |
| Packaging contents: | 1 |
| Working range: | 7,6-17 V |
| Packaging: | carton |
| Operating temperature: | -18°C up to 55°C |
| Work area SAE: | 100-1.400 CCA |
| Work area IEC: | 100-800 CCA |
| Work area EN: | 100-1.400 CCA |
| Work area DIN: | 100-800 CCA |
| Work area CCA: | 100-1.400 CCA |
| Application in general: | for 12 Volt batteries |
| Packaging width, mm: | 167 |
Viewed