Article successfully added.
Handle punch
Handle punch
Description
- according to DIN 7200 form A
- strong forged form
- pipe polished ground
- for punching holes and production of washers and gasket rings
- interior conical for removing the blank head
- shaft machined
- red lacquer
- cutting edge hardened
- special tool steel
Properties
| Material1: | special tool steel |
| Norm: | DIN 7200 Form A |
| Article No. | Description | Diameter D | Packaging height, mm | Packaging length, mm | Packaging width, mm | Total length L in mm | Weight [g] |
RRP: (ex. VAT) |
Quantity |
|---|---|---|---|---|---|---|---|---|---|
| 129.2002 | Handle punch,2mm | 2.0 | 12 | 99 | 13 | 100.0 | 40 | €7.00 * €14.40 * | |
| 129.2003 | Handle punch,3mm | 3.0 | 13 | 107 | 17 | 100.0 | 40 | €7.00 * €14.40 * | |
| 129.2004 | Handle punch,4mm | 4.0 | 12 | 102 | 16 | 105.0 | 40 | €7.00 * €14.40 * | |
| 129.2005 | Handle punch,5mm | 5.0 | 20 | 117 | 14 | 110.0 | 50 | €7.00 * €14.40 * | |
| 129.2006 | Handle punch,6mm | 6.0 | 16 | 17 | 116 | 110.0 | 50 | €7.00 * €14.40 * | |
| 129.2007 | Handle punch,7mm | 7.0 | 20 | 113 | 8 | 115.0 | 50 | €8.00 * €14.40 * | |
| 129.2008 | Handle punch,8mm | 8.0 | 16 | 113 | 20 | 120.0 | 70 | €8.00 * €14.40 * | |
| 129.2009 | Handle punch,9mm | 9.0 | 20 | 126 | 24 | 120.0 | 70 | €8.00 * €14.40 * | |
| 129.2010 | Handle punch,10mm | 10.0 | 20 | 124 | 26 | 130.0 | 70 | €9.00 * €14.21 * | |
| 129.2011 | Handle punch,11mm | 11.0 | 20 | 132 | 28 | 130.0 | 100 | €11.00 * €19.10 * |
Viewed