Cleaning up a storm in vehicle interiors
- Cleaning and vacuuming in one operation
- No mask needed
- Spick and span without elbow grease
Professional cleaning of vehicles is a real labour of Hercules. After all, dirt and dust collect in every nook and cranny in particular. Cleaning guns are available to get to grips with this problem. But they have one decisive disadvantage. Because they swirl up a lot of dust, the operator has to wear a dust mask when using them. The new compressed air cleaning gun from KS Tools stands out from the crowd with an integrated suction device. By connecting it to a vacuum cleaner, not only is there no need for the mask, but an additional work step is also eliminated. The three-part compressed air cleaning gun set with suction device is now available under the product number 515.1935 from KS Tools.
„Anyone who works with a classic cleaning gun knows that this is a dusty business,“ say the people at KS Tools. „Although the dust is bound by the cleaning liquid applied at the same time, this only prevents it from being swirled up to a limited extent.“ By connecting a vacuum cleaner, on the other hand, the professional auto valeter catches the dust precisely when it is needed: directly during work. And, of course, this makes things more efficient, because the additional work step of vacuum cleaning is no longer necessary. The fact that this also eliminates the need for a mask makes work even more pleasant.
The new three-part compressed air cleaning gun set with suction device is ideal for cleaning upholstery, door pillars, ventilation ducts, carpets, floor mats and fabric seats right down to the deepest fibres. The gun is easy to handle because it is connected to the workshop‘s own compressed air source. With its unique cyclone cleaning technology rotating on ball bearings, the unit creates targeted air turbulence for winkling the dirt out of every crack and corner. Because compressed air is used here, the process is particularly efficient and energy-saving.
The compressed air gun is suitable for all kinds of surfaces, whether they would normally be dry or wet cleaned. Above all, the compressed air pinpoints hard-to-reach areas between the seats, along seams or at the ventilation slots without any difficulty. The device atomises the cleaning solution very finely, so that the surfaces are only slightly wetted and quickly dry again.
The cleaning gun is very easy to handle, in particular thanks to a ball joint plug-in nipple that can be rotated through 360 degrees and set at an angle of up to 30 degrees. This allows the professional valeter to concentrate fully on the surfaces and angles that present themselves during the work, without having to worry about turning or tilting the device. The pressure can be adjusted as desired with the integrated pressure regulator.
The compressed air cleaning gun set with suction device consists of the compressed air cleaning gun with suction device itself, the suction adapter from 32 to 42 millimetres and the 180 centimetre long suction hose; it is therefore immediately ready for deployment in the fight against dirt.
