Article successfully added.
HSS Cone and deburrer 75°
HSS Cone and deburrer 75°
Description
- form C
- right hand cutting
- 75° countersink angle
- cylindrical shaft
- deep ground flutes
- surface without discolouration
- high performance steel
Ideally suitable for deburring and countersinking in steel, non ferrous metals and light metals as well as chatter free countersinking.
Properties
| Application material: | steel, non ferrous metals and light metals |
| Colour: | silver |
| Countersink angle: | 75 |
| Cutting direction: | right |
| Cutting material: | HSS |
| Form: | form C |
| Material1: | high performance steel |
| Packaging contents: | 1 |
| Shaft form: | cylindric |
| Surface: | polished |
| Article No. | Description | Diameter D1 | Diameter D2 | Shank diameter D3 | Total length L in mm | Weight [g] |
RRP: (ex. VAT) |
Quantity |
|---|---|---|---|---|---|---|---|---|
| 336.0042 | HSS Cone and deburrer, 75°,6,3mm | 6.3 | 1.6 | 5.0 | 45.0 | 10 | €12.50 * €28.09 * | |
| 336.0043 | HSS Cone and deburrer, 75°,8mm | 8.0 | 2.0 | 6.0 | 50.0 | 12 | €13.00 * €31.48 * | |
| 336.0044 | HSS Cone and deburrer, 75°,10mm | 10.0 | 2.5 | 6.0 | 53.0 | 14 | €15.00 * €35.74 * | |
| 336.0045 | HSS Cone and deburrer, 75°,12,5mm | 12.5 | 3.2 | 8.0 | 56.0 | 24 | €18.00 * €39.99 * | |
| 336.0046 | HSS Cone and deburrer, 75°,16mm | 16.0 | 4.0 | 10.0 | 63.0 | 44 | €24.00 * €53.03 * | |
| 336.0048 | HSS Cone and deburrer, 75°,25mm | 25.0 | 6.3 | 10.0 | 71.0 | 64 | €33.50 * €75.42 * |
Viewed